How to Remove Mold in the Bathroom Alone

Black mold in the bathroom can cause problems for the host due to playback using microscopic spores; the fungus infects large areas of walls and ceilings in a short space. It is necessary to get rid of this problem immediately after your appearance since the mold makes the bathroom look nice and can also be dangerous to the health of people and pets. You can clean the tile of the fungus with your own hands without resorting to specialized cleaning services; you need to know some of the main points.

How to Remove Mold in the Bathroom Alone
How to Remove Mold in the Bathroom Alone

 

Preparing for the removal of mold

You can clean the tiles on the walls and ceilings of the bathroom with his bare hands using specialized tools, as well as using traditional recipes. Regardless of the method chosen, it is necessary to perform a preliminary preparation for the procedure to the most effective. Don’t forget that the mold is not only looking nice but also dangerous to health. Therefore, it is recommended that you prepare in advance

  • thick rubber for cleaning;
  • medical mask or cotton gauze bandage, and when working with household chemicals powerful-a respirator;
  • safety glasses
  • for easy handling of hard-to-reach areas in walls and ceilings;
  • brush, sponge, or brush to apply the composition;
  • food capacity for preparation of the solution.

Before using any tool of your choice to wipe the black fungus bathroom surfaces completely, it is necessary to clear the top layer of the mold. To do this, use an aqueous solution of chlorine-containing funds is applied with a soft sponge while washing the mold surface.

 

Household chemicals

In hardware stores, you can find specialized tools for virtually every need, and get rid of the mildew in the bathroom is no exception. Among these funds, you can find both the budget as the imports more expensive, but there is virtually no difference in the effect of your use.

Bleach “Whiteness”

The medium between the cheap household chemicals can be called the “whiteness” of the national production. Initially, it was planned as laundry bleach, but it can also be used to combat the mold on the walls and the bathroom ceiling. The chlorine content in your composition causes the destructive effect of “whiteness” in the fungus. For the processing of ceramic tiles, it is necessary to dilute the whiteness with water in the ratio of 1:10 and remove the fungus of plastic panels; the concentration must be reduced by half.

Cillit Bang

Under this brand, it’s produced a specialized tool that allows you to destroy black molds effortlessly on the walls and ceilings of the bathroom. It is ready for use immediately after purchase; you don’t have to be diluted with water, and it has a convenient way of spraying, which makes it convenient to spray it on any surface. Many people notice your impeccable effect on smooth surfaces, but in the space between the tiles, Cillit Bang is not always effective.

This spray can remove fungus on the walls and the ceiling and get rid of black spots on the shower curtain.

Veksa for mold

This specialized tool allows you to quickly and without much effort to remove mold from bathroom surfaces, produce your Russian company. Veksa allows you to remove black fungi of ceramic surfaces, plastic, wood, and stone, and in each case, the concentration will be different. The tool is produced in the form of a spray, so it is convenient to apply it on any surface without using additional tools.

 

Folk remedies

Combat mold on the walls and the bathroom ceiling can be performed with the help of specialized means of purchase and when using solutions made by themselves. This option is cheaper than buying household chemicals, but it may be less effective in some cases.

Vitriol

The most popular for cleaning mold from the walls and the bathroom ceiling is the copper sulfate-small blue crystals that can be bought in hardware stores. To get rid of black mold, you need to prepare a solution at the rate of 100 g of copper sulfate in 10 liters of water. Treatment with this agent should be held exclusively with the use of personal protective equipment.

Hydrogen peroxide

It is popular in medicine and at the farm and can be considered the safest way to remove black mold. To clean the tile and other affected areas, it is necessary to use 3% hydrogen peroxide. However, it should be borne in mind that alone she doesn’t always handle the task; sometimes, it is necessary to prepare a complex solution with your participation.

Boric acid, vinegar, and hydrogen peroxide

To increase the effect of hydrogen peroxide, you can prepare a more effective tool. To do this, mix vinegar, boric acid, and water in a proportion of 2:2: 1:4.In Na resulting solution, you need to moisten the sponge and then destroy the black spots of mold in all the affected areas. The remains of the composition are washed with SOAP and water and then with clean water.

Soda and vinegar

Many of the culinary experts know the reaction that occurs when sodium bicarbonate is poured with table vinegar. This process can be used to combat the black mold in a bathroom, but it’s suitable only for horizontal surfaces. Soda powder should be poured over the affected area with a thick layer, then pour vinegar. When the foam settles down, his remains should be removed with a sponge dampened with soapy water.

Tea Tree Oil

If the mold appeared recently, it would be much easier to combat it; in particular, you can use tea tree essential oil. To prepare the solution, dilute 1-2 tablespoons oil in 0.5 l of water, mix well the mixture and place it in a spray bottle. The resulting remedy must be sprayed in all groups of fungi and left in that state for 12 hours.

 

Mold on sealant

Not everyone knows how to remove the mold in the bathroom of a sealant because some tools might be too aggressive for him. That mold is no less dangerous than the common fungus in the tile; you need to get rid of it immediately, without waiting for the problem to grow. It can cause diseases of vital organs in people and animals, so it is necessary to take measures quickly.

To fight the fungus rationally in the silicone sealant, it is necessary to determine the extent of the problem. If the problem appeared recently, it might be enough to wash the mold and treat your site location with an antiseptic. If the situation is in progress, it is necessary for more laborious processing.

Dissolve a small amount of detergent to clean the bathroom in warm water, then wet a sponge in the mixture and clean all the affected areas. So, removing the top layer of the mold on the surface of the sealant, you need to wash the remnants of the solution with clean water. After that, the affected areas need to be treated with any bleach; the whiteness will be enough and, after 10 to 15 minutes, rinse and dry the surface. The bleach will clean not only the sealant but also returns to the original tone. In addition, to get rid of the fungus in the silicone sealant, you can use vinegar, soda, or hydrogen peroxide.

It is not always possible to get rid of the mold for the first time; sometimes, it appears in the same place again, sometimes after processing. If you performed the procedure several times, but the fungus still appears in the silicone sealant, the only way out is to remove it to find the real center of fungus growth. Having gotten rid of the old sealant with a knife, you need to clean the mold and other debris from the cavities, wash with a SOAP solution and disinfect with an antiseptic.

Leave a Comment